Michael, a third year undergraduate Engineering master’s student from the University of Warwick, has spent his summer undertaking an internship at XCAM. As his internship comes to an end, here’s what Michael had to say about his experience:

“My time at XCAM has been both thoroughly enjoyable and a highly educational experience. The knowledge and skills I have acquired over these past six weeks from professional engineers are invaluable. The team at XCAM are like a family and I always felt welcome working alongside them. I started this internship expecting only to be working on FEA simulations of a PFO monitor to aid in its flight qualification, but have in actual fact been involved in a variety of projects ranging from designing a rig for testing the quantum efficiency of CMOS sensors, to researching ESA’s different launchers to aid the design of the PFO sensor.

Although I am now well versed on ESA’s launch systems and procedures, the majority of my time here has been spent designing a new iteration of the PFO monitor, which is intended for eventual space-flight. Creating this 3D model has expanded my knowledge of real-world engineering and faced me with practical challenges, the likes of which are not often encountered in academia. Whilst I tried to be as independent as possible, help was always at hand in the form of my fellow engineer Fraser, whose SolidWorks expertise was always available. I had never considered some of the technicalities that must be considered when designing a device for space, such as having to vent all screw holes to allow trapped air escape. Designing a model of such detail is something I have never previously done. It required me to not only pull from my mechanical engineering knowledge, but also forced me to learn some electronic engineering, something I have previously had little experience with.

I am grateful to the entire XCAM team for having me these past six weeks, but especially so to Karen, XCAM’s CEO, for giving me this opportunity, and to Fraser for vastly improving my SolidWorks skills.”

Michael will return to the University of Warwick in September to complete the final year of his undergraduate studies where he will be working on the School of Engineering’s WUSAT cubesatellite mission, a three-unit Cubesat to be launched into Low-Earth Orbit via the International Space Station with the objective of monitoring wildlife movement patterns. XCAM are collaborating partners to the WUSAT team following an introductory meeting earlier this year; we look forward to following the progress Michael and the rest of the team make over the next academic year.

The single-detector RIXSCam^TM Mini system developed by XCAM has been launched at the 13th International Conference on Synchrotron Radiation Instrumentation (SRI 2018) in Taiwan. The system uses the same EMCCD detector as the successful, multi-detector RIXSCam^TM system with modifications to provide a more cost-effective solution for RIXS beamline scientists who do not have the same high-throughput requirements intended for the original triple or double-detector RIXSCam™ system. Furthermore, the system has been designed to enable the detector to be replaced if it becomes damaged in-use, providing a long-term, economical solution for RIXS experiments.

 A poster presentation was given at the conference to announce the launch of the single-detector system and to present some intial results from the first ever RIXSCam^TM triple-detector system, designed by XCAM in conjunction with scientists at the ADRESS synchrotron beamline at the Paul-Schrerrer Institute (PSI) in Switzerland. Initial results from the RIXSCam^TM at PSI show a 30% increase in energy resolution due to the system’s innovative use of a centroiding algorithm, which also takes into account pixel edge effects, providing sub-pixel resolution which has allowed previously unresolved magnon excitations to be resolved.

For more information about XCAM’s family of RIXSCam^TM camera systems please visit the RIXSCam™ webpage, or submit an enquiry by visiting the contact us page or emailing sales@xcam.co.uk.

Today at the 2018 Cleanroom Technology Conference, XCAM Ltd. announce the launch of the PFO 1040 real-time surface particulate contamination monitoring system. Live demonstrations will be performed at XCAM’s exhibition booth at the conference where customers are invited to register their interest for the purchase of a PFO 1040 unit, which can also be purchased via the XCAM website for those unable to attend.

Time-Resolved Automatic Particulate Monitoring

The PFO 1040 offers cleanroom operators a novel solution to tracking particulate contamination down to the five-micron level by using a robust and reliable direct imaging technique (patent pending). A bespoke algorithm analyses particles and fibres which settle on the 4 cm² sensor surface and reports information such as size, shape, particle/fibre classification and particle size distribution, as well as allowing individual particulates to be interrogated within the resulting image. This method allows sample rates of 10 measurements per hour, allowing contamination events to be reported in real-time and consequently improving manufacturing processes and production yields. The automatic nature of the instrument reduces costs as it removes the need to retrieve and analyse samples manually, with the additional benefit of the instrument performing in-situ analysis which minimises disturbances to samples allowing a representative snapshot of particulate contamination levels. Particulates are particularly problematic for the aerospace, semiconductor and automotive industries to name a few where the powerful features of this instrument have the potential to disrupt current best practices in the field.

                “We’re really excited about the release of our latest innovative product.  The PFO 1040 has the potential to provide cleanroom operators with a new high-resolution, real-time method of measuring particulate deposition levels, as well as getting far more information regarding particulate types. This will enable detailed tracking and investigation of contamination trends, allowing processes to be improved and yields increased, whilst reducing labour costs.” said Karen Holland, CEO at XCAM.

Spin-off from European Space Agency (ESA) Contract

The initial concept for the PFO 1040 instrument was born out of a need for the space industry to develop a real-time, continuous and remote method of tracking particulate contamination produced within the fairing of a rocket, and around sensitive instruments, prior to and during the launch phase.  Characterisation of the particulates would allow sources to be identified and failure analysis to be performed, as well as the monitoring of particulate levels relative to contamination budgets. The European Space Agency therefore funded a contract for the development of such an instrument which XCAM Ltd. Successfully bid for and won. The contract successfully came to completion in January 2017. Recognising that there was a need for such an instrument in terrestrial-based clean rooms and following on from the success of the ESA prototype Space PFO monitor, XCAM undertook developments to adapt the ESA prototype for commercial use in clean rooms.

PFO 1040 Availability

PFO 1040 is now available by submitting an enquiry via the XCAM website or by e-mailing the XCAM Sales Team at sales@xcam.co.uk.

Visit the PFO 1000 series product page for more information

The experiment controller board developed by XCAM for the CAPSA cold atoms cubesat payload project was successfully delivered to the QT Hub for Sensors team at the University of Birmingham by XCAM engineers Friday. The experiment controller was fully functional upon its first iteration with all control modules and current sources operating as intended.

This signifies another key milestone achieved by XCAM in relation to the Teledyne e2v led, Innovate UK-funded project. Other key subsystems which will eventually make up the cold atom payload are under development, to be integrated with the XCAM controller soon. Therefore a series of operational tasks were performed in order to simulate the signals from the other subsytems and test the experiment controllers ability to read back the measurments and acquire images via XCAM’s existing TRL9 C3D imager (successfully delivered previously in the project), as if the cold atom experiment were fully operational. Teledyne e2v engineers were present to witness the testing and brought an ion pump controller along which the experiment controller was successfully able to operate and return a pressure value for.

This represents a significant achievement for the XCAM team having successfully delivered a complete working system in just six months since the specification for the CASPA payload was finalised. The work XCAM engineers undertook included drawing up a circuit schematic, getting the PCB circuit board designed and manufactured, testing, and integration with the existing C3D imager controller. The C3D imager controller will also undergo further development to a new version based on the previous system flown on the AlSat Nano CubeSat mission, and will be deliverd in 6 months time with the final system delivery. These developments include updated components, increased on-board memory, a USB 2.0 interface for fast and easy lab testing, and a faster SPI over LVDS interface which will allow C3D to capture and transfer images in video mode.

The CASPA project aims to develop a 6U cubesat payload capable of producing and maintaining a cold atom experiment in space with the potential to measure tiny changes in Earth’s gravitional field. Read more about the CASPA project in our previous article here.

For more information about XCAM’s C3D cubesatellite imager please visit the C3D product webpage, or visit the contact us page to submit an enquiry.

Eliot, a Theoretical Physics undergraduate student from University of Birmingham, is now in the final week of his eight-week summer internship working at XCAM. Eliot has made a great addition to the XCAM team during his time here. Here’s what he had to say about his experience:

I’ve had a very enjoyable experience at XCAM, learning a lot about what it’s like to work at a technology business whilst also developing my computing/electronics skills. Everyone was welcoming and fun to work alongside, and as a small business there is a relaxed atmosphere – I was also here for the annual golf tournament which I had a great time at despite my lack of skill!

The main project I worked on during my eight weeks was to develop Python code to control the OGRE camera system. This involved converting pieces of code from other languages, and putting it all together into a program which can be used to get images from the camera. It was interesting to learn how the OGRE system operates, and undertaking a programming project of this scale has given me confidence developing code in the future. Additionally, I had the chance to help make some posters/ information sheets about the projects XCAM is working on (including OGRE). This acted as a break from coding, and helped me learn more about what XCAM does.

One of the biggest challenges was testing and debugging the code I’d written, as communicating with hardware isn’t something I’ve had much experience with. Independent research was encouraged, which is good practise to have, but help was available if needed. I applied for this internship because I was interested in learning more about scientific computing whilst also contributing to some innovative science – OGRE will be demonstrating a style of instrument that could potentially go on to search for baryonic filaments between galaxies. I’m very grateful to XCAM for giving me this opportunity, thank you!

Thanks, Eliot, for your all your hard work and contributions! Good luck with the rest of your studies!

Position Sensitive Detectors 11 is a multi-disciplinary, international conference which brings together researchers from both industry and academia to encourage cross-fertilisation and the transfer of ideas between different fields. It will feature a variety of sensor applications which could range from the use of EMCCDs in RIXS experiments for synchrotron beamline scientists such as with XCAM’s RIXSCam system, to novel new techniques such as XCAM’s PFO 1000 Monitor. This year’s event, organised by the Open University in Milton Keynes, is taking place from 3^rd – 8^th September 2017 and has a strong focus on detectors in industry.

The industrial exhibit will be taking place in the first two days of the conference; XCAM will be in attendance both at the exhibition booth, and with two talks being given by XCAM employees relating to XCAM’s RIXSCam and PFO 1000 systems. There will also be a talk from an XCAM sponsored student within the OU’s research group who will be presenting work relating to the OGRE system, a NASA-funded sounding rocket project for space for which XCAM is developing the camera system.

We look forward to hopefully seeing you at our exhibition stand!

Check out the PSD11 website for more information.

XCAM engineers will be at the 2017 NASA Contamination, Coatings, Materials, and Planetary Protection Workshop at NASA Goddard Space Flight Center in Maryland, USA this week to jointly present the latest developments of the PFO Particulate Fall-Out Monitor, alongside representatives from the European Space Agency (ESA). The workshop is a multi-disciplinary event attended by industry and academic professionals focussed on fostering successful space missions.

The original prototype PFO Monitor development was an ESA funded project which XCAM successfully bid and won the contract for. The PFO Monitor provides a remote, automated, real-time method of detecting particulate contamination. Initially intended for use within the fairing of rockets to measure particulate fall-out produced by vibrations during launch into space, further research and development has also focussed on producing a terrestrial-based version for use in commercial cleanrooms, to replace traditional methods such as witness plates which tend to be retrospective in nature and require human intervention. This novel use of silicon sensing technology allows particulates to be detected to below the five-micron level, providing an effective contamination control method for surface particulates.

Go to the PFO 1000 Particulate Fall-Out Monitor product page for more information

The winners of the Insider Made in the Midlands Awards 2017 were announced at an awards ceremony in Birmingham last night; XCAM are delighted to have been selected as the winner for the Advanced Engineering/Technology category for a second, consecutive year, based on their innovative C3D CubeSat camera system which has been successfully demonstrated in space.

The winners and shortlists from each category can be viewed on the Insider website, which describes XCAM as a business which “relishes the challenge of the technically difficult and making it work” and whose “new generation of cameras for outer space shows a company taking Midlands’ ingenuity to the final frontier.”

XCAM’s success in the regional awards means they will automatically be shortlisted for the national Insider Made in the UK Awards 2017, the winners of which will be announced at a second awards ceremony in Liverpool on Thursday 22^nd June.

A cold atom cloud suspended in a magneto optical trap (MOT) has been successfully imaged by XCAM’s C3D CubeSat camera system. The captured image shows the cold atom cloud as the bright spot at the centre of the image, produced using the University of Birmingham’s miniature MOT system, with XCAM engineers working alongside a team from the UK National Quantum Technology Hub in Sensors and Metrology. The cold atom cloud is formed from rubidium atoms held within a vacuum chamber using a combination of lasers and magnetic fields to cool and trap the atoms. This represents an initial milestone for collaborators of the Cold Atom Space Payload (CASPA) project, led by Teledyne e2v, which aims to reduce the size, weight and power of such a system such that it is compatible as a 6U CubeSat payload.

For more information read our previous post about the CASPA project.

(Image courtesy of University of Birmingham)

XCAM attended the Science Day held by Northampton High School, a local school for girls, in support of the opening of their brand new junior science lab. CEO of XCAM, Karen Holland, was invited to ‘cut the ribbon’ which included igniting a container full of flammable gas, much to the excitement of the audience. Other events throughout the day included fun science demonstrations from Atomic Tom, rocket launches and an on-site planetarium, to name a few.

The science lab has been constructed to engage the girls in science before they reach secondary school, to inspire them to uptake STEM related subjects at later stages of their academic career. Northampton High School actively encourages participation in STEM subjects amongst their students including offering STEM ambassador programmes to the senior students, who interviewed XCAM engineers as part of their work, and a recent trip to a conference for the junior students who were lucky enough to meet astronaut Tim Peake!